Fence installation & repair in Rancho Santa Fe, CA.

For visible fence projects in the Covenant, the full architectural approval process typically runs six to twelve weeks. The submittal package needs architectural drawings, material specifications with manufacturer data, color samples, site survey, photographs of existing condition, and the proposed design reviewed by a local architect or landscape designer familiar with Covenant standards. We coordinate with the property's architect or landscape designer throughout the review and prepare the full submittal package as part of standard project scope. Crosby Estates and other sub-HOA approvals typically run shorter (three to six weeks).

Yes. Equestrian work on the Covenant and surrounding equestrian-zone parcels is one of our regular larger-scope projects. A typical project runs 1,500-4,000 linear feet of three-rail rough-cut cedar or redwood with 2x4 welded-wire no-climb mesh on the inside face, pressure-treated 4x6 posts set 36 inches deep in concrete, 14-16 foot drive gates with hardwired or solar-powered automatic operators, and pipe corral around stables and round pens. We integrate stable, barn, arena, and tack room access with the larger fence layout and coordinate scheduling around horse turnout.

Rancho Santa Fe estate fence projects typically run $50K-$200K+ depending on scope. Equestrian wood-and-mesh perimeter on multi-acre parcels runs $40-$75 per linear foot for general perimeter, with the pipe corral, gate, and operator scope adding meaningfully. Ornamental wrought iron with stone pillar columns runs $250-$500+ per linear foot depending on pillar count, stonework grade, and ornamental detail. Full estate perimeter with multiple gates, automatic operators, integrated landscape design, and the architectural review coordination routinely crosses $100K-$150K.

Yes. Wrought iron with stone or stucco pillar columns is one of our regular Covenant estate scopes. Standard spec is 24-30 inch square pillar columns in natural stone veneer or stucco-over-CMU, custom-fabricated wrought iron infill panels matched to the pillar height (typically 48-72 inches), and integrated landscape lighting commonly built into the column cap. Drive gates run 14-20 feet with automatic operators sized for the gate weight, keypad entry, intercom integration with the main residence, and design coordination with the property's architect or landscape designer. Approval through the Rancho Santa Fe Association takes six to twelve weeks for visible work.

Yes. California pool code requires a barrier of at least 60 inches with self-closing self-latching gates that latch above 54 inches from grade, openings small enough that a 4-inch sphere cannot pass through, and a vertical-slat or solid-panel design that does not provide footholds. On Rancho Santa Fe estates we typically build the pool-code fence as black or bronze powder-coated ornamental aluminum or custom wrought iron inside the rear yard perimeter, sized to enclose the pool deck and any spa or water-feature area. We coordinate the design with the broader estate fence character.