A wood fence bid in San Diego is a measured line plus named lumber, posts, hardware, gates, removal, and review. Fence Pros San Diego is a referral service. It does not install fences, set prices, or warrant lumber. No verified per-foot pine, cedar, or redwood table sits in the approved claims ledger.
What should be on the written wood scope
Ask each bidder for:
- Species and grade for pickets, rails, and posts, called out separately if they differ
- Height, style (dog-ear, board-on-board, shadowbox), and gate count
- Footing notes for line, end, corner, and gate posts
- Fastener and hardware list, especially on coastal lots
- Stain or seal as included, excluded, or later
- Demo, haul-away, and access
- Who calls 811 and who files HOA or permit paper
Rocky inland soil in Tierrasanta, El Cajon, or Santee can change digging. Sloped lots in La Mesa or Clairemont need a rack or step note. Those are scope items, not invented adders.
Compare best wood for a San Diego fence for species questions. Do not treat that page as a year-count.
Sequence without a fake calendar
A useful sequence is still: measure, confirm line and review, mark utilities, set posts, then hang rails and pickets after the contractor’s stated cure. How many calendar days that takes depends on HOA, permits, access, and weather. This site does not publish a 5-to-10-day county clock or a 100-foot-per-day crew rate.
California’s 811 locate is a real pre-dig step. Build the contractor’s locate window into the plan. Fence Pros San Diego does not dispatch crews.
Cedar, redwood, and pressure-treated pine as product questions
Western red cedar, redwood, and pressure-treated pine are different products. Heartwood, grade, ground-contact rating, and finish change the job. Coastal moisture in Ocean Beach, Pacific Beach, La Jolla, and Coronado is a hardware and finish conversation. Inland heat is an irrigation and checking conversation. No 15-to-20-year lifespan is verified here.
Hardware near the water should be named. There is no verified two-mile stainless rule. See coastal fence hardware.
First stain timing is a product-label and moisture question. See when a new wood fence is ready for staining.
Property lines, permits, and HOA
Do not assume the old fence is on the recorded line. A licensed land surveyor locates boundaries. A fence contractor builds the line you authorize. See when to get a fence property survey. This page does not publish a survey fee.
For a City of San Diego parcel, Table 142-03A uses 7 feet for that division’s building-permit split. Section 142.0310 covers yard height design rules, including lower solid heights at front and street-side lines. Confirm the current text.
Unincorporated County parcels use PDS 070 for qualifying fences not over 6 feet that also meet zoning, with the posted 42-inch and 72-inch zoning excerpts. Confirm jurisdiction.
HOA CC&Rs can restrict species, stain, and height. Review cycles vary. The independent contractor can assemble a packet. This referral service does not file it.
Shared lines: California Civil Code section 841. C-13 covers fences and gates and excludes masonry walls. Check the CSLB license tool. Business and Professions Code section 7048’s under-$1,000 exemption does not cover a typical install.
Frequently asked questions
How much does a wood fence cost per foot in San Diego?
No verified band is published here. Compare itemized proposals.
Do I need a permit?
Ask the desk that owns the parcel. City and County public tables differ. Other cities have their own rules.
How long does installation take?
The contractor sets the calendar after review and locates. This site does not publish a countywide day count.
How long will the fence last?
No verified year count sits in the approved claims ledger. Maintenance and footing details matter more than a slogan.
When to call us
Call when you want a licensed independent contractor to measure a wood line and write a comparable scope. Call us at (858) 400-4906 and we’ll match you with a fence professional.